Printed Glass Storage

Delivery dates should be scheduled to minimize the amount of time custom printed glass is stored at the job site.  If possible, shipping crates should be stored inside to make sure the glass stays dry.

Temperature is also important.  The printed glass should remain above the dew point to prevent condensation and possible glass staining.  Avoid exposure to rain, water or direct sunlight.  Improper storage conditions can result in damage to the product.

Printed Glass Handling

In service, glass breakage due to thermal and mechanical stresses can occur if glass edges are damaged in handling. Edges of the glass should not be allowed to contact frames or any hard surfaces during handling, storage or installation.

Printed Glass Cleaning

Wash with a mild soap or detergent and lukewarm water using a clean sponge or soft cloth. Rinse well with water. Dry thoroughly with chamois or moist cellulose sponge.

Remove masking adhesives, glazing compound, grease and paint splashes with compatible cleaning agents.

Wash again with a mild soap or detergent and lukewarm water using a clean sponge or soft cloth. Rinse well with water. Dry thoroughly with chamois or moist cellulose sponge.

• ALWAYS use clean soft clothes or sponges for cleaning, washing, and rinsing.
• ALWAYS follow application with warm water rinse.

• DO NOT use abrasives or high alkaline cleaners.
• DO NOT leave cleaners on, wash immediately.
• DO NOT use scrapers, razors, or squeegees.